Two very totally different Yamahas dominate this weekend’s version of Speed Read. We take a more in-depth take a look at the brand new Yamaha XSR900 DB40 Prototype, and we profile a slick Yamaha XS650 road tracker from Canada. We additionally try a brand new BMW R18 equipment from Poland, and a tasty Honda VF1000F2 from Bavaria.
Yamaha XSR900 DB40 Prototype Since it broke cowl in 2016, the Yamaha XSR900 has been successful. Effectively a tweaked MT-09 in neo-retro trim, it appears to be like, sounds and rides superb—and it will get even higher whenever you customise it.
This customized Yamaha XSR900 comes immediately from the Japanese marque’s in-house design workforce. Dubbed the ‘DB40 Prototype, it broke cowl final weekend on the Goodwood Festival of Speed. And we completely find it irresistible.
The DB40 Prototype follows on from CROIG’s ‘Yard Built for Good’ customized XSR900, and from the launch of the model’s new vary of café racer-style XSR equipment. It’s a nod to Yamaha’s illustrious racing historical past, and attracts inspiration from 80s and 90s racing bikes. We can clearly see inspiration from the Yamaha TZR250, YZR500 OW01, and different basic Yamaha race bikes.
The DB40’s most blatant function is its unimaginable entrance fairing. Supported by customized brackets and fairing stays mounted behind the highest yoke, it does a bang-up job of injecting some old-school-cool into this contemporary efficiency bike. But that’s not all that Yamaha has carried over from their heritage.
The ‘DB40’ designation refers to Yamaha’s 40-year-old Deltabox body design. First featured on the Yamaha YZR500 Grand Prix machine in 1982, it’s been up to date through the years and remains to be being produced as we speak. The spotlight this, this bike’s body has been painted silver, placing it on full show towards the darkish bodywork.
Öhlins suspension, a moody paint scheme, and a really slick tail part rework the bare XSR900 right into a slippery retro race bike. The taillight and seat are significantly neat, and we love how the underside half of the engine is left uncovered.
The Yamaha XSR900 DB40 Prototype was ridden up Goodwood Hill on every of the competition’s 4 days in entrance of an adoring crowd. If it wasn’t for the shortage of indicators and headlight, we might suppose that this can be a manufacturing bike—it’s that well-finished. And with rumors swirling that Yamaha are planning to launch a brand new R9 based mostly on the XSR’s cracking triple-cylinder engine, we’re hopeful. [Yamaha Motorcycles]
Matt Thomas’ Yamaha XS650 The Yamaha XS650 was fairly superior when it was launched in 1969, and gave the British parallel twins of the time a very good run for his or her cash. Its second lease on life got here within the 2010s, when it shortly turned a darling of the burgeoning café racer scene.
Matt Thomas is a fan. Based in Canada, he picked up a 1979 Yamaha XS650 for simply CA$450 [about $340] final summer time, then tore it down in his dwelling storage. Spending each night and weekend by means of winter whereas his children had been tucked away in mattress, Matt turned the salvaged bike right into a svelte road tracker.
The large win right here is how nicely Matt has slimmed down the XS650. A 1974 DT360 gasoline tank sits as much as, with its slim traces suiting the fashion of the construct properly. It’s been painted in a classy Lamborghini Titanium Silver.
The engine was cleaned and polished, and the highest finish was rebuilt. The manufacturing unit headers had been most likely tubes of rust by the point Matt bought his palms on the bike so he changed them with an attractive two-into-one system, terminated with a reverse cone muffler. A pair of Mikuni VM34 carbs finishes off the engine.
The body was liberated of all pointless tabs and brackets, whereas the subframe was chopped and looped. It was then completed with a customized seat that Matt’s spouse was type sufficient to upholster for him.
The rear fender was made by welding items of a 1979 and a 1983 Yamaha fender collectively, then painted to match the tank. Matt fabricated the chain guard and tailight setup himself. Low-profile flip alerts are hidden on the bike, and the construct is saved road authorized by means of a side-mounted license plate.
The wheels had been painted black and handled to a brand new set of chunky tires, a cut-down entrance fender, and drilled brake rotors. Fork gaiters and a 5” bottom-mount headlight give the entrance finish much more perspective.
Mounted on new risers and 1” bars are a set of Vans x Cult grips, a brand new throttle meeting, a brand new grasp cylinder, and some fundamental switches. A tiny Motogadget speedo was squeezed into the area between the body and the tank, additional lowering muddle.
Matt tells us that he’s been fixing up bikes for years, however that is his first full teardown and customized construct. And if that is his first, we are able to’t wait to see what he comes up with subsequent. [Matt Thomas Instagram]
BMW R18 equipment by Unikat Motorworks When BMW first pulled the covers off the manufacturing model of the R18, the motorcycling world was a little bit… stunned. The thought of the historically pragmatic German marque releasing a cruiser was a little bit bizarre. And even thought the BMW R18 appears to be like loads higher than the final cruiser BMW launched, the ill-fated R1200C, it’s nonetheless lengthy, low and heavy, with just a few awkward design factors.
That mentioned, there’s a definite magnificence lurking deep throughout the R18 that may be persuaded to rise to the floor. That’s the place Poland’s Grzegorz Korczak and his workshop, Unikat Motorworks, come into the image. They have created a bolt-on bobber equipment for the BMW R18 that transforms the bike completely through a handful of well-judged tweaks.
The most notable design enchancment is the brand new muffler design. Unikat has fabricated tighter and shorter silencers that mix fantastically with the OEM headers and warmth shields. They take over 100 hours to make by hand however they’re a marked enchancment over the bloated manufacturing unit fishtails.
Unikat has put in dB killers, in order that the exhausts unleash a bassy rumble quite than a harsh scream. And they will produce these in black too, if that’s your jam.
The equipment additionally features a single bobber-style diamond-stitched seat, and the required mounting {hardware}. It sits on small struts which can be adjustable, providing an inch and a half of motion forwards and backwards, and the power to regulate the angle. Lower down are a set of chrome steel foot pegs, designed to mount to the body with none mods.
Custom 18” wheels have been laced onto the inventory hubs, and there are customized fenders each entrance and rear. The headlight and gauge cluster have been lowered utilizing extra customized brackets to enhance the traces. Motogadget bar-end flip alerts and mirrors, and leather-based grips, sit on customized handlebars, slimming down the management space.
The engine has been painted to match the edges of the tank and numerous covers have been blacked out. Real silver flake was used to pinstripe the tank, including an additional contact of sophistication to the in any other case basic BMW paint scheme. Highsider LEDs sit below the seat, doing double obligation as taillights and switch alerts.
Unikat are promoting a lot of the above as a bolt-on equipment. The set contains the seat, exhausts, fenders, foot pegs, headlight and gauge decreasing equipment, and a license plate mount. The relaxation is as much as you. [Unikat Motorworks]
Honda VF1000F2 by Woidwerk Looking at a inventory Honda VF1000F2, you’d by no means actually know {that a} 998 cc, 122 hp V-four hides below all these fairings. Back in 1985, Honda squeezed the massive 4 right into a sports activities tourer, geared up with an additional radiator, and proved that it might be fairly a flexible bundle.
Fast ahead 40 years, and Ralf Eggl of decrease Bavaria’s Woidwerk got here into possession of a really particular VF1000F2. This specific 1985 instance was purchased, model new, by Ralf’s grandfather, and is the very bike that launched a younger Ralf to the world of motorcycling. His grandfather used the bike day by day till 2005, after which it was parked for ten years.
The bike was in sore want of consideration, and Ralf was all too comfortable to oblige. He began with the obvious modification—eliminating a lot of the fairing. But this was simpler mentioned than executed.
First, he needed to take away the decrease fairing and its mounts, then, he lowered the complete entrance part of the fairing by just a few inches. This left ugly gaps between the fairing and tank, however Ralf was in a position to fabricate aluminum air scoops to mix the 2 again collectively. The smoked display was reduce down to finish the bundle
The tank, engine, and entrance finish had been principally left alone—however they had been rebuilt and given a recent coat of paint. The again finish is the place Ralf bought difficult once more, by chopping a bit out of the manufacturing unit seat and narrowing the complete rear part. A brand new two-up seat with customized stitching sits up high, and though it doesn’t appear like something Honda would’ve executed within the 80s, it nonetheless has a manufacturing unit really feel.
Finishing touches embrace a brand new exhaust (donated by an Aprilia V4), purple coolant hoses, a slick Martini-Porsche fashion paint scheme, and new Wilbers rear suspension. It’s one other incredible construct from Woidwerk, and it’s a good way to honor the person who bought Ralf into bikes within the first place. [Via]
Source: www.bikeexif.com
